EasyManua.ls Logo

WaveForm Cel-Fi GO X - Indoor Antennas: Separation; Separation Guidelines and Examples; Checking Separation with Wave App

WaveForm Cel-Fi GO X
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Indoor Antennas: Types & Placement
07
Before choosing a location for your indoor antennas, you’ll need to understand how your
indoor antennas broadcast signal. Depending on which kit you purchased, you'll have either
dome or panel antennas included in the box.
Panel Antennas
A panel antenna has a narrower “spray” (technically called a “beamwidth”). This means that
it directs signal in one direction, and not in a circle, like a dome antenna. Panel antennas
should be installed on a wall near the perimeter of the coverage area for best results. For
example, you might use a panel at the end of the hallway or at one end of your house.
Dome Antennas
Dome antennas should be installed in the ceiling, centrally to the area you are looking to
cover. Some (but less) signal will also radiate upwards to cover the oor above. You’ll need to
have access to an attic or crawl space to run the cable.