EasyManuals Logo

Waves SSL 4000 E User Manual

Waves SSL 4000 E
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
SSL E-Channel & G-Channel User Manual
9
Dynamics Section Controls
Compressor (white knobs)
The compressor’s Ratio/Slope can be set from 1 to infinity (limiter).
The Threshold is variably adjustable from +10 dB to -20 dB.
When the Attack time switch is set to Slow (F.ATK off) attack time is auto-sensing and
program dependent. Fast setting (F.ATK) attack time is 1 ms.
Release time is adjustable from 0.1 to 4 seconds.
Expander/Gate (green knobs)
The expander’s Threshold is variable from -30 dB to +10 dB.
Range is variable from 040 dB.
When the Attack time switch is set to Slow (F.ATK off) attack time is auto-sensing and
program dependent. Fast setting (F.ATK) attack time is 1 ms.
Release time is adjustable from 0.1 sec to 4 seconds.
The Gate switch toggles the section from an expander (default mode) into a gate.
Dyn To
Bypass bypasses the entire dynamics section. Note that selecting Bypass does not result in a
flat signal, but rather one which mimics the flat response of the SSL channel strip hardware.
Ch Out moves the dynamics to the output of the E-Channel, making it post-EQ.

Other manuals for Waves SSL 4000 E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Waves SSL 4000 E and is the answer not in the manual?

Waves SSL 4000 E Specifications

General IconGeneral
BrandWaves
ModelSSL 4000 E
CategorySoftware
LanguageEnglish

Related product manuals