SmartSensor Advance
QUICK-REFERENCE GUIDE
www.wavetronix.com
801.734.7200
Manufacturer’s recommended mount-
ing locations:
1 e near side of approach. is is
the preferred location.
2 On a luminaire. is location
oen reduces the oset and in-
creases the mounting height.
3 e back side of mast arm.
4 e front side of mast arm. At
this location, 100 feet or more of
the sensor’s range is used to cross
the width of the intersection.
2
Select the mounting location
You will need a number of items in order to install your sensor, including but not limited to the items below:
˽ Mount bracket and Band-It clamping system
˽ 6-conductor cable and accessory cables
˽ Click 650 or preassembled backplate
˽ Laptop with SmartSensor Manager Advance
(SSMA) downloaded from wavetronix.com
˽ Bucket truck
1
Ensure that all necessary components are available
➊
➋
➌
➍
Follow the steps below to nd the target
location:
1 Determine mounting height (between
17 and 40 feet is recommended; typical
mounting height is about 25 feet).
2 Determine your oset. is is the dis-
tance from the sensor to the center of
the lanes of interest.
3 Use the table to the le to determine
your target distance.
Example. If your height is 25 feet and your
oset is 10 feet, you will want to aim the
sensor 60 feet down the road.
Mounting Height (ft / m)
Oset to Center of Lanes (ft / m)
17 / 5.2 20 / 6.1 25 / 7.6 30 / 9.1 40 / 12.2
0 / 0 40 / 12.2 45 / 13.7 55 / 16.8 60 / 18.3 75 / 22.9
5 / 1.5 45 / 13.7 45 / 13.7 60 / 18.3 65 / 19.8 80 / 24.4
10 / 3 50 / 15.2 50 / 15.2 60 / 18.3 65 / 19.8 80 / 24.4
15 / 4.6 50 / 15.2 55 / 16.8 65 / 19.8 70 / 21.3 80 / 24.4
20 / 6.1 55 / 16.8 55 / 16.8 65 / 19.8 75 / 22.9 90 / 2 7.4
25 / 7.6 60 / 18.3 65 / 19.8 65 / 19.8 75 / 22.9 90 / 27.4
30 / 9.1 65 / 19.8 70 / 21.3 75 / 22.9 80 / 24.4 95 / 28.9
35 / 10.7 70 / 21.3 75 / 22.9 85 / 25.9 85 / 25.9 95 / 28.9
40 / 12.2 80 / 24.4 90 / 2 7.4 90 / 2 7.4 95 / 28.9 100 / 30.4
45 / 13.7 95 / 28.9 100 / 30.4 100 / 30.4 100 / 30.4 105 / 32
50 / 15.2 100 / 30.4 100 / 30.4 105 / 32 110 / 33.5 120 / 36.6