Way Basics Blox Cube User Manual

Help and Comments www.waybasics.com/help Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
1 Backer Board
4 holes for pins
2 Horizontal zBoards
2 Vertical zBoards
6 holes for pins
16 Pins
Included
BLOX CUBE
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
1
2
3
4
Place alignment pins in
vertical zBoards and backboard.
Start with the bottom horizontal
zBoard. Align vertical zBoards and
backboard to holes in the horizontal
zBoard.
Align horizontal zBoard and press
firmly to secure unit together. Visit links
below for more details.
Enjoy building possibilities!
Carefully remove the 3M
protective layer from adhesive.

Way Basics Blox Cube Specifications

General

Brand	Way Basics
Model	Blox Cube
Category	Indoor Furnishing
Language	English

Summary

BLOX CUBE Assembly Guide

Prepare Adhesive and Pins

Remove adhesive backing and insert alignment pins for assembly.

Assemble Unit Base

Connect vertical zBoards and backboard to the bottom horizontal zBoard.

Secure Final Assembly

Align and press the top horizontal zBoard to complete the unit.

Important Safety and Handling Information

Assembly Best Practices

Start assembly from the bottom to top and avoid placing unit on its side or back.

Choking Hazard Warning

Contains small parts not suitable for children under 3 years.

Product Features and Benefits

Eco-Friendly Materials

Made from recycled paper products, promoting sustainability and health.

Lifetime Guarantee

Way Basics stands behind products with a lifetime guarantee for customer satisfaction.