Wayne WPCP250 User Manual

SPECIFICATIONS
POWER SUPPLY REQUIREMENTS
120 V, 60 Hz
MOTOR Single Phase, Auto ON/OFF
HORSEPOWER 1/4 HP
CIRCUIT REQUREMENT 15 A (minimum)
690002-001 B 11/19© 2019, WAYNE/Scott Fetzer Company
CONSTRUCTION
MOTOR HOUSING Thermoplastic
MOTOR SHAFT Stainless Steel
IMPELLER Thermoplastic
VOLUTE Thermoplastic
PUMP DISCHARGE 3/4 in. Hose Threads
Auto On-Off Water Removal
Pool Cover Pump
www.waynepumps.com
PERFORMANCE
Model HP Discharge Head 0 ft. 5 ft. 10ft. 15 ft. 20 ft.
WPCP250 1/4 Gal/hr 1900 1580 1250 850 350
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Operating Instructions and Parts Manual WPCP250

Wayne WPCP250 Specifications

General

Model	WPCP250
Type	Swimming Pool Pump
Horsepower	2.5 HP
Voltage	230V
Warranty	1 Year
Phase	Single
Horsepower Type	Full Rated
Max Flow Rate	150 GPM

Summary

Important Safety Instructions

Child Supervision Safety

Ensures children are supervised when using the product to prevent injury.

Electrical Safety and GFCI Use

Guidelines for grounding, GFCI testing, and recognizing potential shock hazards.

Installation Distance Precautions

Specifies safe distances for electrical outlets near pools to prevent shock.

General Safety Information

California Proposition 65 Warning

Informs about chemicals known to cause cancer, birth defects, and reproductive harm.

Personal Safety Guidelines

Recommendations for wearing safety glasses and using GFCI outlets.

Application and Operation

Pumping Height and Backflow

Discusses pump discharge height limits and potential backflow issues.

Drop-In Pump Application

Provides instructions for placing the pump in an in-ground pool.

Above Ground Pool Installation and Removal

Above Ground Pump Installation

Details on how to install the pump on an above ground pool cover.

Above Ground Pump Removal

Instructions for safely removing the pump from an above ground pool cover.

Maintenance and Troubleshooting

Periodic Cleaning

Steps for cleaning the pump inlet and switch housing.

Troubleshooting Common Issues

Guide to diagnose and fix pump starting, stopping, or water delivery problems.

Limited Warranty