69/269
The default unlock code for the lock is
：0-0-0-0
1. Unlock the anti-theft device (default code 0000)
2. Slide the reset button to the right (SET mode)
3. Set a new code by turning the wheels
4. Slide the reset button to the left
To attach the scooter to a fixed support:
1. Pull the cable of the anti-theft device
2. Press the unlock button
3. Insert the cable head into the lock
4. Turn the wheels to lock the device
To remove the scooter from a fixed stand:
1. Enter the unlock code
2. Press the unlock button
3. Pull the cable out of the lock
4. Store the cable in the stem
After use, push the anti-theft cable upwards to pull it up into the stem
and secure the cable head in the storage stand to prevent it from hanging
and getting caught in the wheel.
To Next Page
Loading...
