Step-by-step Guide/How-to
Technical Support Hotline: 1-833-574-9124 (Option 1) • Email Address: tech@wboxsupport.com
Website: www.wboxtech.com
Other Event Actions:
Alarm out – if this is enabled and an alarm device is connected to the recorder, the recorder will
trigger the alarm device whenever a motion is detected.
Push message – if this is enabled, the device will push an alarm notification on the WBOX VMS1 app
whenever a motion is detected.
Pop-up message – if this is enabled, there will be a pop-up message on the main screen whenever a
motion is detected.
Send E-mail – if this is enabled, the device will send an alarm notification to the email address
configured in Setting > Network > Email whenever a motion is detected.
4. To configure the motion area and sensitivity, go to Area.
On the live preview on the page, you may select the motion area. Click the left mouse button on the live
preview and drag the mouse on the specific area that you would like to set. The red grids represent the
area that you have selected. To clear the area, just perform a double-click action using the left mouse
button.
Select a Sensitivity option from the drop-down list. You may select from Low, Medium, High and Highest.
To Next Page
Loading...
Need help?
General
