WBOX Technologies 0E-HD16C2TB User Manual (English)

To Next Page

Step-by-step Guide/How-to

Technical Support Hotline: 1-833-574-9124 (Option 1) • Email Address: tech@wboxsupport.com

Website: www.wboxtech.com

How can I enable the motion detection recording on DVR V4.2 or NVR V4.2?

Product Models:

Hybrid DVR

NVR

0E-HD4C1TB

0E-4CHNVR1TB / 0E-4CHNVR2TB

0E-HD8C2TB

0E-8CHNVR2TB

0E-HD16C2TB

0E-16CHNVR2T / 0E-16CHNVR4T

Firmware Version: V4.2.XXXX.0000.157.X.XX.X.X

Preparation:

If you would like the device to record on motion detection only, please ensure to DISABLE the SCHEDULED

RECORDING. To do this, please follow the steps below.

1. On the device’s main page, click the right mouse button and select Record Schedule under Record.

2. Choose a specific Channel and disable the Record Enable option. Click Apply to save the settings.

Other manuals for WBOX Technologies 0E-HD16C2TB

Need help?

Do you have a question about the WBOX Technologies 0E-HD16C2TB and is the answer not in the manual?

General