Step-by-step Guide/How-to
Technical Support Hotline: 1-833-574-9124 (Option 1) • Email Address: tech@wboxsupport.com
Website: www.wboxtech.com
How can I enable the motion detection recording on DVR V4.2 or NVR V4.2?
Product Models:
0E-4CHNVR1TB / 0E-4CHNVR2TB
0E-16CHNVR2T / 0E-16CHNVR4T
Firmware Version: V4.2.XXXX.0000.157.X.XX.X.X
Preparation:
If you would like the device to record on motion detection only, please ensure to DISABLE the SCHEDULED
RECORDING. To do this, please follow the steps below.
1. On the device’s main page, click the right mouse button and select Record Schedule under Record.
2. Choose a specific Channel and disable the Record Enable option. Click Apply to save the settings.
To Next Page
Need help?
General
