WCM CTX8010 - Lubrication of Work Equipment Pins; Lubrication of Slewing Bearing and Gears

25
Technical maintenance
A Grease
Parts
Quantity
Interval (h)
10
50
100
250
500
1000
2000
1. Lubrication
of work
equipment
pins
Pivot at base of boom
Pivot at base of boom
cylinder
Pivots of bucket and
connecting rod
10
★
Others:
6
★
2. Lubrication of slewing bearing
2
★
3. Lubrication of external meshing
gear of slewing bearing
1
★
Note: it is recommended to use the lithium grease.
★ Maintenance interval under normal conditions
1. Maintenance and lubrication of work equipment pivots
● Pivot between bucket and connecting rod
● Pivot at base of boom
● Pivot at base of boom cylinder