WDP ANGEL G7 - User Manual

1
ANGEL G7
© 2005 WDP LTD.
CONTENTS
• This Operators and Users Manual is in English.
• It contains important safety guidelines and Instructions.
• Should you be unsure at any stage, or unable to understand
the contents within this manual you must seek expert advice.
• Le mode d’emploi est en Anglais.
• Il contient des instructions et mesures de sécurité importantes.
• En cas de doute, ou s’il vous est impossible de comprendre
le contenu du monde d’emploi, demandez conseil à un expert.
• Este manual de (operarios y) usarios està en Inglés.
• Contiene importantes normas de seguridad e instrucciones.
• Si no esta seguro de algún punto o no entiende los contenidos
de este manual debe conultar con un experto.
• Diese Bedienungs- und Benutzeranleitung ist in Englisch.
• Sie enthält wichtige Sicherheitsrichtlinien und -bestimmungen.
• Sollten Sie sich in irgendeiner Weise unsicher sein, oder den Inhalt dieses
Heftes nicht verstehen, lassen Sie siche bitte von einem Experten beraten.
WARNINGS
Important Safety Instructions & Guidelines 2
OPERATING INSTRUCTIONS
Charging 3
Switching On Your ANGEL 3
Making the ANGEL Safe 4
Switching Angel Eyes On/Off 4
Propellant Air/Nitrogen Supply 4
Macro Line Hose/Connector attachment 5
Macro Line Hose removal and re-attachment 5
Loaders (Hoppers) 5
Soft Nose Bolt Removal & Rotor Breech 5
Velocity Adjustment 6
Twist Lock Feed Collar 6
LCD MENUS
Basic Menu 7
Menu – Fetch – Timer – Angel Eyes Test
Advanced Menu 7 – 8
MROF – Hopper (Loader) T Time – Hopper
(Loader) A Time
Hopper (Loader) Type – Temperature – Vibrator – Trip – Backlight
SEND IR – ROF – MODE – Dwell – Cycles – ID – Trigger Offset
Internal Electronic Menus 8
Factory Default Settings 8
FIGURES
1 Basic & Advanced Menus 9
2 Internal Menu 10
3 Internal Text Programming 10
4 Internal PIN Programming 10
5 External PIN Lock/Unlock 11
6 Game Timer Activation
11
MAINTENANCE
General Care and Cleaning 12
General Assembly - Right Hand View 12
General Assembly - Left Hand View 13
Sub Assemblies 13
Cutaway – Right Hand View 14
Cutaway – Left Hand View 14
Mini-Regulator Service 15
Anti-Double Ball Detent Service 15
Angel Eyes Service, Removal, Test & Replacement 16
LPR Adjustment 17
LPR Assembly Removal 18
LPR Main Seal Replacement 18
Exhaust Guide Removal 19
Exhaust Valve Stem Removal 19
Ram Removal 20
OPTO Board 21
Vernier Trigger Adjustments 21
Vernier Trigger Wheel Removal 22
Battery Removal 23
Wiring Connections 23
APPENDIX
Fault Finding Table 24
Useful Conversions 24
Terms of Warranty - EEC/R.O.W Exc USA/CAN 25
WDP Ltd. Express Warranty USA/CAN Only 26
Updates 27
Your Personal Details
27
Notes 28

Summary

General Safety

Important Safety Instructions & Guidelines

Provides crucial safety instructions and guidelines for handling the ANGEL marker.

Operating Instructions

Charging the ANGEL

Detailed steps for charging the ANGEL marker's power pack and indicators.

Switching On Your ANGEL

Procedure for powering on the ANGEL marker, including LED and LCD indicators.

Making the ANGEL Safe

Steps to put the ANGEL into a safe mode to prevent accidental discharge.

Switching ANGEL Eyes On;Off

Instructions for enabling or disabling the ANGEL's eye system.

Propellant Air;Nitrogen Supply

Details on using compressed air or nitrogen gas for the ANGEL marker.

Macro Line Hose and Connector

Procedure for attaching and detaching the macro line hose and connector.

Loaders (Hoppers) Compatibility

Information on using and selecting compatible loaders for the ANGEL.

Soft Nose Bolt & Rotor Breech Removal

Guide for removing and re-attaching the soft nose bolt and rotor breech.

Velocity Adjustment

Instructions on how to adjust the marker's velocity using the adjustment screw.

Twist Lock Feed Collar

How to secure and remove the loader using the twist lock feed collar.

LCD Menus

Basic Menu Configuration

Overview of the basic LCD menu for viewing and adjusting settings.

Advanced Menu Configuration

Details on the advanced LCD menu for comprehensive marker adjustments.

Mode Feature Settings

Explanation of different firing modes (Semi, Auto, X-Ball, etc.) for the ANGEL.

Internal Electronic Menu Access

Guide to accessing and using the internal electronic menu settings.

Basic and Advanced Menus Visual Guide

Visual breakdown of basic and advanced menu options and their settings.

Internal Text and PIN Programming

Procedure for programming text and PIN codes via the internal menu.

External PIN Lock;Unlock

Steps to lock and unlock the ANGEL marker using an external PIN.

Game Timer Activation

How to activate and use the game timer functionality on the ANGEL.

Maintenance

General Care and Cleaning

Instructions for cleaning and maintaining the ANGEL marker.

General Assembly - Right Hand View

Diagram and identification of parts for the right-hand view assembly.

General Assembly - Left Hand View

Diagram and identification of parts for the left-hand view assembly.

Sub Assemblies Identification

Lists and identifies key sub-assemblies within the ANGEL marker.

Cut Away Views

Illustrations showing the internal components from right and left cut-away views.

Mini-Regulator Service

Procedure for servicing the ANGEL's mini-regulator (2nd stage regulator).

Anti-Double Ball Detent Service

Instructions for servicing the anti-double ball detent assemblies.

ANGEL Eyes Service and Removal

Guide for servicing and removing the ANGEL Eyes optical system.

LPR Adjustment

Procedure for adjusting the Low Pressure Regulator (LPR) settings.

LPR Assembly Removal

Steps for removing the Low Pressure Regulator (LPR) assembly.

LPR Main Seal Replacement

Guide for replacing the main seal within the LPR assembly.

Exhaust Guide Removal

Procedure for removing the exhaust guide from the ANGEL marker.

Exhaust Valve Stem Removal

Steps for removing and replacing the exhaust valve stem.

Ram Removal

Guide for removing the ram assembly from the ANGEL marker.

OPTO Board Overview

Information about the ANGEL's OPTO board trigger sensing function.

Vernier Trigger Adjustments

Steps for adjusting the ANGEL's trigger return stroke and over-travel.

Vernier Trigger Wheel Removal

Procedure for removing and re-assembling the vernier trigger wheels.

Battery Removal and Replacement

Instructions for removing and replacing the ANGEL's battery pack.

Wiring Connections

Diagram and explanation of internal wiring connections for the ANGEL.

Appendices

Fault Finding Table

Troubleshooting guide for common ANGEL operational problems and solutions.

Useful Conversions

Reference table for common pressure, velocity, mass, and distance conversions.

Warranty Terms (EEC;ROW)

Details the warranty terms for the ANGEL in EEC/ROW regions, excluding USA/Canada.

Warranty Terms (USA;Canada)

Details the express warranty terms for the ANGEL in USA and Canada.

Product Updates Information

Information regarding product updates, specifications, and design changes.

Your Personal Details

Section for users to provide personal and purchase details.

WDP ANGEL G7 Specifications

General

Manufacturer	WDP
Model	Angel G7
Action	Electro-pneumatic
Power Source	9V Battery
Max Rate of Fire	20+ BPS
Firing Modes	Semi-Auto, Ramping