OPERATION METHOD
Cooling mode
l When the A/C enters cooling mode automatically or cooling mode is selected
after power ON, the cooling indicator lamp lights up.
l Press Up/Down key to adjust setting temperature (17℃~30℃).
l Press Speed key to choose High/Low speed.
Fan mode
l When pressing mode key or choosing Fan mode by pressing the remote
controller, the wind indicator lamp lights up.
l Press Speed key to choose High/Low speed.
l Temperature can’t be set.
Dry mode
l Press the mode key or select the dry mode through the remote control. The dry
indicator lights up.
l If Ta ≥ °C (or 62°F), the compressor is turned on. Hereafter, it is controlled
according to the following rules: Compressor turns off when Ta ≤ 15°C (or 59°F); restart
when temperature rises to Ta ≥ 17°C.
l In the dry mode, the wind speed is not adjustable and the blower runs at a low
speed by default.
l Temperature can not be set.
Timer mode
l In standby state, press the Timer key to set ON time. Press Up and Down keys
to set ON time (0~24H), and the timer indicator lamp lights up.
l In ON state, pressure the timer key to set OFF time. Press Up and Down keys to
set OFF time (0~24H), and the timer indicator lamp lights up.
Sleep mode (optional)
l When under cooling mode, press the remote control "sleep" key (or at the same
time by the host press "timing" + "down" button key) into sleep mode, the fan forced to
blow low wind, low wind indicator light, wind speed can not be adjusted.
l Mode conversion or press the remote control "sleep" key (or at the same time by
the host "timing" + "down" button), exit the sleep mode.
To Next Page
Loading...