FaceShield Air
FaceShield Air Assembly Instructions
Remove Headband with ComfortPad, Strap and Lens
from box.
Align holes in the top of Lens with snap posts on the
Headband and gently secure by pressing Lens holes
onto snap posts. Lens is reversible so you can use
either side.
Place first adjustment slot of Strap on either right or left side of Headband, place on head, extend Headband
and Strap around your head as you would a normal hat strap, and secure loop through adjustment slot. Once
comfortable, take note of the adjustment slot number on Strap and leave secured – that’s your size!
1 2
3A 3B
Headband
Lens
Strap
To Next Page
