WeatherTech FaceShield Air

To Next Page

FaceShield Air

FaceShield Air Assembly Instructions

Remove Headband with ComfortPad, Strap and Lens

from box.

Align holes in the top of Lens with snap posts on the

Headband and gently secure by pressing Lens holes

onto snap posts. Lens is reversible so you can use

either side.

Place ﬁrst adjustment slot of Strap on either right or left side of Headband, place on head, extend Headband

and Strap around your head as you would a normal hat strap, and secure loop through adjustment slot. Once

comfortable, take note of the adjustment slot number on Strap and leave secured – that’s your size!

1 2

3A 3B

Headband

Lens

Strap

Other manuals for WeatherTech FaceShield Air

Need help?

Do you have a question about the WeatherTech FaceShield Air and is the answer not in the manual?

Remove the Headband, ComfortPad, Strap, and Lens from the product packaging.

Align the lens holes with the snap posts on the Headband and gently press to secure. The lens is reversible.

Position the strap slot, place on head, extend, and secure the loop. Note the adjustment slot number for fit.

Remove, wash with mild soap, dry with a soft cloth, and reattach the ComfortPad to the Headband.

Remove the Lens, wipe with a soft wet wipe, and let air dry or gently dry before reattaching.

General