WeatherTRAK ET Pro3 User Manual

Getting Started Guide v1.1
Included in documentation pack:
Getting Started Guide
 •Warranty
 •InstallationInstructions
 •QuickStartProgrammingGuide
 •FlowReferenceGuide
 •Troubleshooting
SiteProleWorksheets
QuickReferenceGuide
Activate your WeatherTRAK Pro3
Pre-activate to expedite at www.weathertrak.com/activate
or call (800) 362-8774

WeatherTRAK ET Pro3 Specifications

General

Brand	WeatherTRAK
Model	ET Pro3
Category	Network Router
Language	English

Summary

Flow Reference Guide

Flow Monitoring Setup and Configuration

Details setting up flow meter size, K/Offset values, and flow alert clearing.

Flow Sensor Compatibility and Thresholds

Learning Station Flow Rates

Troubleshooting Guide

Alerts Overview and Management

Introduces central alerts, controller beeping, and alert viewing/clearing procedures.

Alert Definitions and Categories

Provides detailed definitions for various flow, valve, communication, and system alerts.

System Alerts - Flow and Valve Issues

Addresses troubleshooting for mainline breaks, high flow, and no flow conditions.

System Alerts - Leak and Electrical Faults

Covers troubleshooting for leaks, valve shorts, and extended leak detection.

System Alerts - Valve and Wiring Problems

Details troubleshooting for valve over current, valve no connect, and wiring issues.

System Alerts - Hardware and Communication Failures

Program, Account, and Irrigation Status Alerts