Need help?Do you have a question about the Weaver Master Tools Little Wonder 2019 and is the answer not in the manual?
Lists essential safety guidelines for operating the machine.
Step-by-step instructions for setting #104 rivets using included driver/anvil.
Instructions for setting #104 rivets using the splash anvil.
Instructions for setting #104 rivets using the cap anvil.
Guides on correcting issues when setting rivets with splash.
Instructions for using the magnetic driver for plated rivets.
Step-by-step guide for setting crystals using the machine.
Guides on correcting issues when setting crystals.
Step-by-step guide for setting spots using the machine.
Guides on correcting issues when setting spots.
Step-by-step guide for setting grommets using the machine.
Guides on correcting issues when setting grommets.
Instructions for setting decorative staples using the spot anvil.
Instructions for setting staples using the loop anvil.
Step-by-step guide for setting eyelets using the machine.
Guides on correcting issues when setting rivets with caps.
To Next Page
General