1
SmarTemp Control
Digital Control Interface For
Air Top 2000 ST / 3900/5500 EVO Heaters
Installation / Operation Instructions
English ……………………………………………………………………………………………………..1
Français ……………………………………………………………………………………………….……6
Español ……………………………………………………………………………………….……....…..13
General
Thank you for choosing Webasto to meet your heating needs. The Webasto SmarTemp Control enables
you to quickly and effortlessly operate the AT 2000 ST or AT 3900 / 5500 EVO Air Heaters.
Operation
The Webasto SmarTemp Control can be operated using a single rotary dial around the outside of the unit
to browse through different menu options. Simply click the select button ( ) to make your choice. The
following sections will define each menu item and its default setting.
Compatibility
AT 2000 ST - Adaptor harness (P/N: 5010612)
AT 3900 / 5500 EVO – Adaptor harness (P/N: 5012138)
Mounting Procedure
1. Find a suitable mounting location (on a flat surface if
possible) in a visible area.
Always
install in an area protected from the
effects of weather and contamination.
2. Use the drilling dimensions / template in the back of
this manual to lightly mark the two mounting holes.
3.
To route wire harness through the
mounting surface, drill a 22mm hole as notated on the
drilling dimensions / template.
Always make sure there are no obstacles behind
the mounting location prior to drilling.
4. Secure the Webasto SmarTemp Control using the two supplied #4 screws.
To Next Page
Need help?
General