Name: Webasto Cool Top RTE 16
Brand: Webasto
Rating: 4 (1 reviews)

To Previous Page

Cool Top RTE 16 7

5 Error codes

In case of a problem, the device shuts down and the display will

show an error message from the following list.

Mes-

sage

Description Troubleshooting

E0 Disconnected compressor

(A power supply cable of the

compressor has disconnected.)

Contact an authorized

Webasto dealer.

E1 Battery power

(The battery-saver has activated.

Power decreased below the set

threshold.)

Start the vehicle in or-

der to recharge the

battery.

E2 Power overload from the cool-

ing fan

(The cooling fan overloads the

board beyond the allowed limit.

Possible cause: short circuit or

something is blocking the fan

from rotating.)

Contact an authorized

Webasto dealer.

E3 Blocked compressor

(The rotor is blocked or the

pressure in the cooling circuit is

too high.)

The E3 – E4 – E5 codes

do not indicate a mal-

function, but is a nor-

mal management pro-

cedure for the

compressor by the

electronic board. Only

if the code continues

to be displayed con-

tact an authorized We-

basto dealer.

Over-current on the compressor

E5 High temperature in the control

board

(If the cooling circuit is over-

loaded or if the surrounding

temperature is too high, the

control board signals this issue.)

E6 Empty circuit

(The system may have lost gas.)

Contact an authorized

Webasto dealer.

E7 Temperature probe

(If the probe has short circuited

or has become disconnected,

the device stops working.)

E9 Power overload from the con-

denser fan

(The cooling fan overloads the

board beyond the allowed limit.

Possible cause: short circuit or

something is blocking the fan

from rotating.)

6 Disposal

Dispose of packaging material as required by standing regulations,

separating them for recycling.

The system cannot be disposed off as regular waste.

Dispose the system according the local applicable rules

and regulations. Obtain information about disposal at

the city council, the responsible waste station and/or

your local Webasto sales partner.

7 Maintenance

WARNING

Sharp edges

Danger of injuries

X When you work near heat exchangers, be careful

not to get cut.

ATTENTION

Any repair or intervention for charging or the collec-

tion of refrigerant must be done at authorised Webas-

to workshops and by qualified personnel.

While washing the vehicle, make sure you do not di-

rect violent jets of water towards the inside of the

condenser unit from the lower part and through the

slits of the electric fan; in case cover it.

Period Action Comments

At least once a

month. Even during

winter months!

Start the unit. Avoid keeping the con-

ditioner inactive for a

long period of time.

Functioning of it guar-

antees the lubrication

of components which

would dry up if left in-

active for a too long

period.

Periodically Check the condens-

er.

If necessary, clean it

with compressed air,

being careful to not

damaging the alumini-

um rests.

Periodically Check the function-

ing of the condens-

er’s electric fan.

Periodically Check cleanliness. Insects, floss and other

material may deposit

on the winglets, reduc-

ing the efficiency of

the heat exchanger.

At the start of each

season.

Inspect every part

of the system, in-

cluding electric

components, to

make sure there are

not any abnormal

conditions.

PB AUTO ELECTRICS PB AUTO ELECTRICS PB AUTO ELECTRICS PB AUTO ELECTRICS PB AUTO ELECTRICS PB AUTO EL

Brand	Webasto
Model	Cool Top RTE 16
Category	Air Conditioner
Language	English

Webasto Cool Top RTE 16 User Manual

Questions and Answers:

Webasto Cool Top RTE 16 Specifications

Related product manuals