Need help?Do you have a question about the Webasto MC04-AirTop Evo M and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Type | Control Panel |
| Operating Voltage | 12V |
| Diagnostics | Error code display |
| Operating Temperature | -40°C to +70°C |
Controls the primary activation and deactivation of the heater, indicated by illumination.
Selects heating modes (Eco, Normal, Plus, Fan, Altitude) via a rotary knob.
Operates the heater in a power-saving mode for moderate temperature and battery conservation.
Heats at maximum power to reach or maintain a desired interior temperature.
Temporarily runs the heater at increased power for rapid interior warming.
Operates only the fan for fresh air circulation or cooling, with adjustable speed.
Ensures optimal combustion at altitudes up to 2,200m; not for MC04 models.
Adjusts interior temperature and fan speed based on the selected operating mode.
Displays normal operation with a green light and faults with flashing codes.
Shows a flashing code for 10 seconds, indicating no fault but recommending service.
To Next Page