MultiControl | SmartControl | UniBox 18
Max active timers
As standard, only one timer can be activated. This option allows
the number of timers that can be activated simultaneously to be
increased to 21.
Please observe the statutory regulations, in particular that only
one active timer is permitted for cars.
3
Select the "Service" symbol in the main menu.
3
The "Quick-start" symbol appears on the display.
Turn the control knob to select the desired symbol "Max active
timers".
3
The default value (number of timers) is displayed.
Press the control knob to confirm the selection.
Turn the control knob to set the value.
Press the control knob to confirm the selection.
Basic configuration
During a reset, all settings are return to the basic configuration
with the exception of the day of the week and the time. After the
reset, the procedure is the same as after installation and for the
initial start-up.
3
The "Quick-start" symbol appears on the display.
Turn the control knob to select the desired symbol "Factory
settings".
Press the control knob to confirm the selection.
3
"OK" appears on the display.
3
Press the control knob to confirm the selection.
3
A restart is performed.
To Next Page
Loading...
Need help?
General
