NiteCool TCC-100/RCC-100 parking cooler system
13
commercially available cleaning/
disinfectant agent containing sodium
hypochloride (follow the mixing ratio as
specified by the manufacturer). Then run
the parking cooler system at blower
setting 6, with the cooling function
switched on, for two hours.
Leave the cab windows open during the
cleaning process and make sure no-one
remains in the cab.
Clean the fresh water tank of mobile
homes according to the vehicle
manufacturer instructions.
c) - After cleaning, drain the system
completely again and thoroughly clean the
water tank with water in order to flush out
the residues.
d) - Fill the system with drinking water if the
parking cooler system is to be put back
into operation again immediately.
e) - Alternatively, the water system can be
cleaned with recommended Katadyn
®
Care products (please follow the
manufacturer's instructions).
Important information
The user is exclusively responsible for
complying with all guidelines, in particular
those relating to the use and function of
the parking cooler system and to hygienic
and sanitary conditions in order to
maintain correct operation.
Failure to follow the instructions will lead to
all liability being refused by Webasto.
To Next Page
Loading...
