To Next PageTo Next Page
Need help?Do you have a question about the Webasto S10-R-230V-REV-R410a and is the answer not in the manual?
General| Brand | Webasto |
|---|---|
| Model | S10-R-230V-REV-R410a |
| Category | Marine Equipment |
| Language | English |
Specifies the intended application of the BlueCool S-Series for heating and cooling on ships.
Defines the necessary qualifications for personnel performing the installation.
Highlights the need to observe relevant regulations and legal requirements during installation.
Details critical safety measures to prevent hazards during installation and operation.
General guidelines and notes to ensure proper operation during installation.
Specifies the necessary conditions and requirements for selecting an appropriate installation location.
Details the steps and precautions for physically installing the air conditioning unit.
Guides on correctly installing the drain line for condensed water, including safety advice.
Instructions for setting up the sea water intake, pump, and outlet system.
Guidance on installing air ducts, including mounting considerations and avoiding restrictions.
General safety warnings regarding electrical connections and voltage handling.
Guidance on selecting and installing appropriate line fuse protection for the system.
Instructions for mounting the electrical box, considering IP protection class requirements.
Details on connecting various components of the BlueCool S-Series, including sea water pump and mains supply.
Steps for installing the BlueCool MyTouch control element, including cutout dimensions.
Configuration of compressor start and stop temperatures for cooling and heating modes.
Ensuring all electrical, sea water piping, and air duct connections are secure and leak-free.
Verifying the proper drainage of condensed water from the unit.
Steps for performing a test run of the system in cooling mode and checking water flow.
Instructions for checking, cleaning, and reinserting the air filter.
Regular checks of the sea water circuit, strainer, and condensate outflow for cleanliness and leaks.
Emphasizes that troubleshooting should only be performed by trained professionals.
Explains how malfunctions are displayed via the MyTouch screen or LED flash codes.
Details the LED indicators on the PC-board for fault indication and normal operation.
Lists fault codes, possible causes, and corrections for LED indications.
Troubleshooting guide for faults where the system does not react or operates incorrectly.
