Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you should take several
steps to keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can be avoided
by taking proper precautions as given below:
• Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both hands on
the saw and position your body and arm to allow you to resist kickback forces. Kickback forces can be
controlled by the operator, if proper precautions are taken. Do not let go of the chain saw.
• Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact
and enables better control of the chain saw in unexpected situations.
• Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and
chains may cause chain breakage and/or kickback.
• Follow the manufacturer’s sharpening and maintenance instructions for the saw chain. Decreasing the
depth gauge height can lead to increased kickback.
ELECTRICAL CONNECTION
Do not connect either core to the earth pin
The insulation on the grounded three metre electrical cord will only remain effective if the original insulating
parts are used for repairs and the spaces between the original insulation are maintained.
The use of a Residual Current Device (“RCD”), on 230V electrics is recommended. If using an extension cable,
plug it directly into the RCD
SPECIFICATIONS
Model THECS40
Product Number 193885002
Motor Power 2200 watt
Motor Voltage 230-240V/50HZ
Chain Speed 13.5m/s
Guide Bar Length 406mm
Chain Pitch 3/8”
Chain Drive Links 57
Chain Gauge 0.050”
Oil Tank Capacity 240ml
Cable Length 3m
Weight (empty tank, without guide bar
and chain)
4.2kg
Declared Vibration Emission 4.5m/s², K=1.5m/s²
Noise Emission Value LWA: 108 dB(A) – KPA: 3 dB(A)
Protection
CLASS II
The manufacturer reserves the right to change the product specification and livery according to continued
product improvements.
To Next Page
Loading...