EasyManua.ls Logo

Webb WEPT360MM - ENGINE OIL; ENGINE STARTING & STOPPING PROCEDURE; STARTING THE ENGINE

Webb WEPT360MM
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGINE OIL
Remove the oil filler cap with built in dipstick. Fill the engine with 4‐stroke SAE30 or 10W/30 air cooled
lawnmower engine oil. DO NOT USE automotive or marine oil. The use of a funnel will aid the filling. The
engine capacity is 0.45L, however we recommend the dipstick on the oil filler is dipped (without screwing into
the filler neck) to ensure the oil level remains between the minimum and maximum marks on the dipstick.
ENGINE STARTING & STOPPING PROCEDURE
STARTING THE ENGINE
Move the engine throttle lever to the ON position (A).
Grab the recoil starter handle and pull lightly until resistance is felt, then pull rapidly.
CAUTION
Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the
starter.
AMBIENT TEMPERATURE
RECOIL
STARTER
HANDLE
INSTRUCTION MANUAL

Related product manuals