LINE TRIMMING (STANDARD)
LINE TRIMMING (SLOPES & UNDER OBSTACLES)
Adjust the angle of the head up or down to ensure you have a clean and unobscured cutting angle.
TRIMMING EDGES
Press in and hold the locking button. Rotate the cutting head 180 degrees. Release the locking button.
Guide the unit, as shown, slowly along the edge of the lawn, using the side wheel. Ensure the Plant
Protector is placed in the upright position, against the motor housing.
CUTTING TIPS
Only cut with the left (shown here as light grey) area of the cutting unit when the unit is being moved
from right to left. In the right (dark grey) area, the threads rotate in your direction.
This represents a high level of kickback risk and objects may be thrown in your direction by the rotation of
the thread. You may be hurt as a result.
When the unit is moved from left to right, ensure that the nylon line is kept away from the grass to ensure
that the grass is not thrown up.
Cut long grass from top to bottom to ensure that the grass does not get tangled around the spool.
Only use the tip of the nylon line. You will use less nylon line & avoid grass getting caught up in the spool.
Only take the nylon line as close as necessary to posts, walls, fences etc. Solid objects will wear the nylon
line. Tree trunks, young trees and bushes may be damaged by the nylon line.
To Next Page
Loading...