WECHEER WE 248 Series User Manual

Thank you for purchasing WECHEER professional power tool.
WE 248 is a light, precise, highly flexible and user-friendly product designed for carving,
engraving, routing, grinding, sharpening, sanding, polishing, drilling and similar tasks.
Please feel free to contact your local suppliers for our other fine tools and accessories.
SPECIFICATIONS
INPUT AC 100V 50/60Hz or 240V 50Hz
OUTPUT DC 24.0V ± 5%, LOAD 750mA
RPM Variable Speed: 3,000 ~ 28,000 RPM
COLLET 2.4 and 3.2 collets and collet nut
DIMENSIONS 150mm Length × 24mm Diameter
OPTION Spring Chuck 0~3.2mm
OPERATION
To load a bit:
1. Turn off and unplug the device.
2. Press the shaft lock button.
[Collet]
Press and hold the shaft lock button.
Use the collet wrench to loosen the collet nut.
Insert the bit. (not included)
Tighten the collet securely.
! avoid excessive tightening of the nut.
Usage:
1. Grasp the device like a pen.
2. There is a switch indicator with an orange line on it. Slide the switch to find the speed
needed
from 3,000 to 28,000 RPM. For a complete stop, be sure to slide the switch to the black dot.
3. Gently touch the piece being worked on, letting the tool to do the work. Keep hands and
fingers away from the rotating bit. The tool operates at speeds up to 28,000 revolutions per
minute, only holding and guiding are required. Do not apply excessive pressure to the device.
4. Slower speeds are recommended for polishing operation. Higher speeds are better for
carving, drilling, cutting, routing and shaping. Hardwoods, metals and glass usually require
Micro Engraver
WE 248 SERIES

WECHEER WE 248 Series Specifications

General

Brand	WECHEER
Model	WE 248 Series
Category	Engraver
Language	English

Summary

Product Specifications

Micro Engraver Operation Guide

How to Load a Bit

Instructions for safely loading a bit by turning off the device, pressing the shaft lock, loosening the collet nut, inserting the bit, and tightening securely.

Using the Micro Engraver

Guide on grasping the device, adjusting speed using the switch, gentle operation, and speed recommendations for different tasks like polishing or carving.

Safety Concerns and Warnings

Safety Precautions and Overload Warning

Essential safety guidelines including voltage checks, unplugging before changes, avoiding shaft lock use during operation, handling hot parts, and motor overload protection.

Maintenance and Support

Maintenance Instructions and Contact

Guidance on cleaning the device with a soft cloth or air compressor, avoiding solvents, and information on where to find support or additional details.