Weed Eater Needie 507 - Assembly Instructions

ASSEMBLY
You should familiarize yourself with the various parts of your Weed Eater
trimmer prior to assembly and operation. -
NOTE: Carefully inspect your trimmer for possible shipping damage.
Power Cord Pigtail I
Handle ■ C
Switch
Upper Handle Tube
Assist Handle
Tube Locking Screws (2)
Lower Handle Tube
Air Vents
Motor Housing
Maximum Line Length Indicator
Rotating Head
Cutting Line
Ball Lock
Spool
Metal Line Savers (3)
Guard
N M
FIGURE 1
1. Insert wiring harness through the slot in the assist handle (Figure 1)
and slide it onto the upper handle tube. Insert bolt in assist handle
and tighten with wing nut.
NOTE: The grip notches on the assist handle should face toward the
motor housing.
5