Weed Eater XT260 User Manual

Please do not return produ ct to retailer.
Por favor, no devuelva el producto al lugar de compra.
Veuillez ne pas retourner le produit au détaillant.
1--800--554--6723
www.weedeater.com
Register your product online at:
Registre su producto en línea en:
Enregistrez votre produit en ligne à l’adresse :
XT260
FX26
R Trademark
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury .
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
ENGLISH ESPAÑOL
FRANÇAIS
WEED EATER
7349 Statesville Road
Charlotte, NC 28269
For O ccasi onal Us e Only
WEED EATER
850 Matheson Blvd. W est
Mississauga, Ontario L5V 0B4
545186831 Rev. 4 3/1/1 0 BRW
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions

Weed Eater XT260 Specifications

General

Type	String Trimmer
Fuel Type	Gasoline
Shaft Type	Straight
Weight	12.3 lbs
Power Source	Gas
Engine Type	2-Cycle
Line Diameter	0.095 inches

Summary

Safety Symbols and Rules

Danger Symbols, Hazard Zones, and Protection

Explains critical symbols, hazard zones, and mandates protective gear.

Operational Prohibitions and Precautions

Warns against child operation, loose clothing, and improper use.

Comprehensive Safety Guidelines

Storage, Servicing, and Fire Safety

Operator Safety and Equipment Use

Operational Safety and Cutting Practices

Personal Safety and Unit Handling

Cutting Safety and Practices

Assembly and Initial Setup

Assembly Verification and Adjustments

Operating Procedures

Unit Familiarization, Controls, and Fueling

Introduces unit parts, controls, and safe fueling procedures.

Engine Starting and Stopping Procedures

Detailed steps for starting and stopping the engine in various conditions.

Trimmer Operation and Cutting

Operating Position and Line Management

Service and Adjustments

Spark Plug and Line Replacement

Trimmer Head and Idle Speed Adjustments

Guides on replacing the trimmer head and adjusting carburetor idle speed.

Storage and Fuel System Care

Unit and Fuel Storage Procedures

Troubleshooting Common Issues

Engine Starting and Performance Problems

Addresses issues like engine not starting, poor idling, or power loss.

Warranty and Compliance

Limited Warranty and Owner Responsibilities

Emission Control System Warranty