To Next PageTo Next Page
Need help?Do you have a question about the Weed Eater XT260, FX26 and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 25.4 cc |
| Cutting Width/Swath | 16 inches |
| Shaft Type | Straight |
| Line Diameter | 0.095 inches |
| Handle Type | Loop |
Highlights safety instructions and warnings present on the unit itself.
Details essential safety practices for the operator, including attire and alertness.
Covers safety precautions related to the unit's maintenance and general operation.
Provides critical safety instructions for handling and storing fuel.
Instructions on how to properly adjust the assist handle.
Guidance on correctly installing the safety shield and line limiter.
Familiarizes users with the controls and components of the trimmer.
Instructions and warnings for safely filling the fuel tank.
Procedure for safely stopping the engine.
Detailed steps for starting the trimmer engine, including cold and warm starts.
Step-by-step guide for starting a cold engine or one that ran out of fuel.
Procedure for starting an engine that is already warm.
Instructions for starting an engine that may be flooded with fuel.
Recommended body posture and safety gear for operation.
How to advance the trimmer line for optimal cutting length.
Techniques for effective trimming, scalping, mowing, and sweeping.
How to trim effectively using the trimmer head.
Method for removing unwanted vegetation down to the ground.
How to use the trimmer for mowing applications.
Using the trimmer for quick clean-up operations.
Inspection points for ensuring all parts and fasteners are secure.
Identifying and addressing damaged or worn components.
Routine inspection and cleaning of the trimmer unit and its labels.
Instructions for cleaning the air filter to maintain engine performance.
Information on the muffler and spark arresting screen maintenance.
Procedure and recommendations for replacing the spark plug.
Detailed steps for replacing the trimmer line.
Instructions for adjusting the carburetor for optimal performance.
How to adjust the engine's idle speed.
Specific steps for preparing the unit for long-term storage.
Important considerations for fuel system preparation during storage.
Steps for preparing the engine for storage, including oiling.
Additional recommendations for storing fuel and fuel containers.
Diagnosing and resolving issues when the engine fails to start.
Troubleshooting problems with improper engine idling.
Addressing lack of power, acceleration problems, or stalling under load.
Identifying causes and solutions for excessive smoke from the engine.
Troubleshooting reasons for the engine running too hot.
Information on emissions control system warranty and owner responsibilities.
