Why does my Weed Eater WE12B fail to operate?
If your Weed Eater Blower fails to operate, first ensure that it's receiving power. Check the power source and try using another wall outlet to rule out a faulty outlet. Inspect the extension cord for any damage and replace it if necessary. Also, check the circuit breaker; reset or replace it if it has shut off or is faulty.
What to do if my Weed Eater WE12B Blower operates intermittently?
If your Weed Eater Blower operates intermittently, the issue might stem from a damaged extension cord. Inspect the cord and replace it if needed. If the extension cord is not the problem, it could be due to a loose internal connection or defective internal wiring, in which case you should call an authorized service center.
Why is my Weed Eater Blower vibrating abnormally?
If your Weed Eater Blower vibrates abnormally, it could be due to a mechanical failure. In this case, you should call an authorized service center.
How to fix a Weed Eater Blower when the impeller will not turn freely?
If the impeller on your Weed Eater Blower will not turn freely, there may be debris in the air intake area. Remove any debris that you find. If the impeller still does not turn freely, it could be due to a mechanical failure, and you should call an authorized service center.
General| Voltage | 12V |
|---|---|
| Engine Type | Electric |
| Power Source | Battery |
| Battery | Lithium-ion |
| Type | Handheld Blower |
Provides customer support phone number and website for product registration and assistance.
Emphasizes reading manual and following safety instructions to prevent serious injury.
Details chemicals in dust and risks, advises on protective measures for health.
Symbol indicating risk of electric shock.
Symbol indicating the tool's double insulation feature.
Lists and identifies all parts of the power tool with corresponding numbers for user reference.
Covers essential safety for work area setup and electrical connections.
Emphasizes staying alert, using protective gear, and preventing accidental starts.
Covers proper tool usage, maintenance, and specific safety for blower operation.
Step-by-step guide for assembling blower tube, nozzle, vacuum tubes, and collection bag.
Guidance on extension cords and risks of vibration exposure.
Instructions for converting the unit and operating it as a blower or vacuum.
Details essential maintenance tasks and cleaning procedures after use.
Lists common problems, their causes, and recommended solutions for efficient troubleshooting.
Presents key technical data and guidance on responsible product disposal.
To Next Page
