To Next PageTo Next PageWhat to do if cables slip off pulleys often on Weider WESY96352 Home Gym?
If the cables on your Weider Home Gym frequently slip off the pulleys, it might be because the cable has become twisted. To resolve this, remove the cable and then reinstall it carefully, ensuring it is not twisted.
What to do if I feel slack when using the rear weight stack on my Weider WESY96352 Home Gym?
If you experience slack when using the rear weight stack on your Weider Home Gym, the Military Press Cable and the Leg Press Cable will need to be tightened.
General| Type | Home Gym |
|---|---|
| Resistance Type | Weight Stack |
| Butterfly Station | Yes |
| Lat Pulldown | Yes |
| Low Pulley | Yes |
| Press Arm | Yes |
| Leg Developer | Yes |
| Weight Capacity | 300 lb |
| Exercises | Multiple |
Instructions for assembling the primary structural components of the gym system.
Steps for attaching and assembling the various arms, including press and butterfly arms.
Detailed steps for routing and connecting all the system's cables and pulleys.
Guidance on assembling and attaching the seat and backrest components.
Specific steps for assembling the Vertical Knee Raise (VKR) station.
Instructions on how to adjust the weight resistance for exercises.
Procedures for connecting accessories to the high pulley system.
Procedures for connecting accessories to the low pulley system.
Steps for securely attaching and detaching the seat.
Connecting the leg lever to the low pulley setup for use.
How to set up the leg press plate for optimal exercise positioning.
Instructions for adjusting cable tension to remove slack and ensure proper function.
