Weidmüller AC SMART ECO - Product modifications

For your safety
7
Operating instructions – AC SMART
► Carry out a visual inspection and create a commissioning protocol before
initial commissioning.
► Observe the requirements for the installation site, see Chapter 15.
Improper installation may cause water to get into EV charging box. This could
result in an electric shock.
► Only operate the EV charging box if it has been assembled and installed
as described in the assembly and installation instructions.
► The IP protection class is only achieved if the EV charging box is
assembled and installed as described in the assembly and installation
instructions.
► Do not use a pressure washer to clean the EV charging box.
► Only clean the EV charging box with a soft, lightly moistened cloth.
Risk to life due to re
Foreignobjectsordirtintheplugcontactscancauseare.
► Check the plug contacts for foreign objects and contamination.
► Do not insert any objects into the plug contacts.
► Remove light contamination, for instance dust or sand, by blowing it out.
► Heavy contamination must be cleaned by an electrician.
CAUTION!
Risk of injury if the EV charging box is damaged
A damaged or incomplete EV charging box can lead to malfunctions and
hazards.
► Only use the EV charging box and its accessories if all parts are
undamaged.
► IfyounddamageontheEVchargingbox,commissionanelectricianto
disconnect the EV charging box from the power supply.
Risk of injury from falling parts
Falling parts can cause hazards and injure personnel.
► Do not place any objects on the installed EV charging box.
► Hang the charging cable on the cable tray when it is not in use.
2.4 Product modications
TheEVchargingboxmaynotbemodiedin any way.Productmodications
interfere with the safety and proper function of the EV charging box.