To Next PageTo Next Page
Need help?Do you have a question about the weinor WeiTronic Combio-868 HD 1.5 kW and is the answer not in the manual?
General| Brand | weinor |
|---|---|
| Model | WeiTronic Combio-868 HD 1.5 kW |
| Category | Home Automation |
| Language | English |
Introduces the WeiTronic Combio-868 MA, LD, and HD models covered by the manual.
Warns against mixing up paired WeiTronic radio receivers to ensure correct operation.
Provides essential instructions for dealers prior to installation and operation.
Specifies the WeiTronic Combio-868 MA, LD, and HD 1.5 kW/3.0 kW models covered.
Advises users to consult general safety instructions and relevant sub-sections for all products.
Stresses adherence to instructions for personal safety and manufacturer non-liability.
Highlights electric shock hazards and mandates use of qualified electricians for connections.
Covers unit checks, professional repairs, use of original parts, and safe operating practices.
Customers must retain instructions; unauthorized alterations require manufacturer permission.
Warns against use in areas causing radio interference, like hospitals or airports.
Notes potential interference from other radio systems and legal limits on radio range.
Specifies that the MA unit is for roller blinds and awnings with tubular motors.
Advises against modifying the aerial length to ensure proper reception.
Provides a numbered sequence for connecting the Combio-868 MA unit to the motor.
Ensures correct receiver pairing to prevent incorrect awning direction.
States the need for a correctly wired STAS3 Hirschmann plug on the motor.
Details the designation, lead colour, and STAS 3 connection points for wiring.
Covers laying the mains lead, fixing the receiver, and turning on the supply.
Guides on checking awning direction and pairing the remote control unit.
Details the steps for pairing the receiver unit with the remote control.
Explains the final steps for pairing the receiver unit with the remote control.
Lists key technical data like voltage, frequency, load, protection, and connections.
Specifies the LD unit is for weinor Lux lighting systems and awnings.
Details steps for installing and connecting the lighting system to the mains.
Guides on checking dimmer operation and pairing the remote control unit.
Illustrates button functions for controlling lighting: on, off, dimming.
Details the steps for pairing the LD receiver unit with the remote control.
Explains how to set and store custom brightness levels for the lighting system.
Lists key technical data for the Combio-868 LD unit, including load and connections.
Specifies the HD unit is for Tempura heating systems (1.5 kW or 3.0 kW).
Advises against modifying the aerial length to ensure proper reception.
Details connecting the HD unit to the heating system via a STAS 3 Hirschmann plug.
Shows wiring details for connecting the HD unit to the Tempura heating system.
Instructs on connecting the mains lead and ensuring proper power disconnection for shortening.
Covers affixing the receiver unit and turning on the mains supply.
Illustrates button functions for heating control: on, off, level adjustment.
Details the steps for pairing the HD receiver unit with the remote control.
Explains the final steps for pairing the heating receiver unit with the remote control.
Details how to set and store custom output levels for the heating system.
Lists key technical data for the Combio-868 HD unit, including load and Tempura connection.
Refers users to separate instructions for operating weinor remote controls.
Explains how to check the correct function of receiver units using paired controls.
Summarizes UP/DOWN button actions for awnings, lights, and heating systems.
Lists the various programming procedures covered in the following sections.
Instructs to turn on power and wait for the unit to start moving.
Details pressing the Learn button, then UP and DOWN buttons for pairing.
Instructs to turn on power and observe light flashes indicating status.
Details pressing the Learn button, then UP and DOWN buttons for light/heating pairing.
Illustrates the timing for UP/DOWN commands for awning motor programming.
Illustrates the timing for UP/DOWN commands for light/heating programming.
Guides on assigning additional remote controls to a receiver unit.
Explains how to pair multiple units for simultaneous operation.
Details the process to remove a specific remote control from a receiver.
Explains how to delete all paired remote controls, resetting the receiver to a new state.
Guides on setting the first programmable output level using the UP button.
Guides on setting the second programmable output level using the DOWN button.
Details the procedure for deleting the DOWN output level setting.
Details the procedure for deleting the UP output level setting.
Provides a table summarizing various button combinations for receiver operations.
Advises regular checks for wear/damage and immediate action for faults.
Lists common faults like no signal or poor signal and their respective causes and remedies.
Addresses faults where the drive runs in the wrong direction and provides solutions.
Covers safety during repairs and how to order replacement parts through a dealer.
Provides contact details for inquiries about other weinor products.
