To Next PageTo Next Page
Need help?Do you have a question about the Weka DK12 and is the answer not in the manual?
Keep work area clean and illuminated; avoid explosive ambiances; keep others away from the tool.
Ensure proper plug fit, avoid body contact with earthed surfaces, keep away from wetness, use correct extension cords.
Be attentive, wear protective equipment, avoid unintended start-up, remove tools before switching on.
Do not overload, use undamaged tools, unplug before adjustments, keep away from children, maintain tools, keep cutting tools sharp.
Have tools repaired by qualified personnel with original spare parts.
Wear hearing protection, use additional handles, maintain distance from rotating parts, keep others away.
Provides technical specifications such as voltage, current, power, speed, drilling capacity, and weight.
Details sound pressure, sound capacity, and weighted acceleration levels according to EN 50144.
Connect via GFCI, use earthed sockets, and ensure PRCD inline protector is functional.
Connect with GARDENA coupling, observe max 3 bar pressure, use clean water.
Fasten gearbox securely in a solid drill stand, ensure axis parallelism.
Motor starts softly; electronic overload protection switches off motor if force is not reduced.
Change gears only when the machine is stopped to avoid damage.
Protects against overstrain, activates within 2-3 seconds to prevent wear.
Details tool fixture compatibility, recommends high-quality bits, and provides tips for use and changing.
Notes on using the machine with a drill stand, including fixing methods and stability.
Instructions for hand-held drilling, including starting angle, pressure, and care for high torque.
Procedures for dry drilling using dust extractors, precautions for masonry, and spindle dryness.
Guidance on water quantity, contact pressure, segment sharpening, and avoiding vibration.
Recommends replacing gear oil after 100 hours by a specialist.
Check and replace carbon brushes after approx. 300 hours with an electrical specialist.
General
