Need help?Do you have a question about the Welbilt Kolpak ArcticFox Deluxe Display and is the answer not in the manual?
General| Brand | Welbilt |
|---|---|
| Model | Kolpak ArcticFox Deluxe Display |
| Category | Controller |
| Language | English |
Defines DANGER, Warning, Notice, and Caution symbols and their implications.
Outlines critical safety measures for installation and maintenance.
Details how to check shipments for damage and shortages.
Provides guidance on warranty claims, registration, and service.
Lists electrical, environmental, and input/output parameters for the controller.
Details the operating range and housing of the temperature sensor.
Lists available accessories for the display and controller system.
Shows a system with only the Deluxe Display.
Illustrates a setup with one Deluxe Display and one OEM controller.
Depicts a system using one Deluxe Display and two OEM controllers.
Shows front, side, and back measurements of the enclosure.
Provides specific measurements for the internal circuit board.
Illustrates the connection points for the Deluxe Display.
Shows wiring diagrams for OEM controller boards 1 and 2.
Explains navigation and content of the Alarms & Variables menu.
Details the names, descriptions, and states of alarms and variables.
Guides on entering, navigating, and saving setpoints.
Lists available setpoints with their min, max, default, and description.
Guides on accessing controllers and navigating the Variables menu.
Details the names, descriptions, and meanings of controller variables.
Instructions for entering the Setpoints menu and password.
Details how to adjust, change, and save setpoint values.
Lists available setpoints for the OEM controller with parameters.
Covers defrost termination and temperature offset settings.
Details settings for auxiliary inputs and secondary room temperature.
Settings for adjusting pressure and temperature readings.
Lists refrigerants supported by the controller.
Explains the function of various auxiliary input modes.
Guides on accessing the Manual menu and entering the password.
Lists functions for manual control of relays, valves, and alarms.
Instructions on accessing and scrolling through the Alarms menu.
Details various alarm conditions and their causes.
Explains remote communication via the OEM Evaporator.
Lists various ways to connect and access controllers.
To Next Page
