3. During the temperature
measurement cycle,
“walking” segments will
appear on the display in-
dicating measurement is
in process.
4. When the final temperature has been reached, a tone will
sound and the patient’s temperature will be displayed.
5. After the temperature
measurement is com-
plete, remove the probe
from the patient, then
eject the probe cover by
firmly pressing the ejec-
tion button on the probe.
6. Insert the probe into the storage channel to clear the
display, in preparation for another temperature.
NOTE: When using the Monitor mode, allow the tempera-
ture readout to stabilize for 3 minutes.
14
To Next Page
Loading...