Why is my Well INSTANT HEATING water not heating?
If your Well Plumbing Product isn't heating water, it could be due to a disconnected power supply circuit wire or insufficient water pressure. Ensure the power supply circuit wire is securely connected and that the water pressure is at least 0.04MPa.
What to do if my Well INSTANT HEATING Plumbing Product has low water and high temperature?
If you're experiencing low water flow and high temperature with your Well Plumbing Product, it might be due to excessive water pressure or low voltage. Try decreasing the water pressure and verifying that the power supply voltage is correct.
How to fix low water outlet on Well INSTANT HEATING Plumbing Product?
A low water outlet on your Well Plumbing Product could be caused by a blocked water inlet or low water pressure. Inspect the inlet filter for any dirt or blockages and remove them. Also, increase the water inlet flow and pressure.
Why is there no indicator light on my Well INSTANT HEATING Plumbing Product?
If the indicator light isn't on, on your Well Plumbing Product, the hydraulic pressure might be too low to activate the power supply, or there could be a circuit fault. Ensure the water pressure is at a normal level for the water heater to function correctly.
General| Brand | Well |
|---|---|
| Model | INSTANT HEATING |
| Category | Plumbing Product |
| Language | English |
Essential safety guidelines for using the appliance, including warnings for children, installation, and water connection.
Details on product compliance with IEC/EN standards and RoHS, outlining its basic function.
Highlights safety mechanisms like automatic cut-off, isolation, thermal fuse, and high mesh filters.
Explains benefits like water/electricity saving, no storage tank, and adjustable temperature for family use.
Crucial notes on temperature limits, first-time use, water scale cleaning, grounding, cord replacement, and wiring.
Lists technical details including voltage, frequency, pressure, IP rating, power, and cord type.
Describes different installation plans, water inflow, power socket placement, and initial water flow checks.
Details on circuit installation by technicians, appropriate power wiring, and cable color coding for safety.
Explains how to use the handle to switch between hot and cold water and the indicator light status.
Details the handle rotation range for hot water, cold water, and the off area.
Explains the meaning of the indicator light color (Blue or Red) during heating.
Instructions for cleaning the nozzle and inlet strainer to maintain performance.
Guides on resolving common faults like no heating, temperature issues, and no indicator light.
To Next Page