What to do if Well Walgreens WGNBPA-950 shows EE error?
If the Well Blood Pressure Monitor displays the EE error, or if the blood pressure reading seems too low or high, it might be due to incorrect cuff placement. Make sure you re-wrap the UltraSoft™ upper arm cuff properly. Also, remember to keep your arm still and avoid talking during the measurement. Then take a new measurement.
Why does my Well Walgreens WGNBPA-950 show E1 error?
If your Well Blood Pressure Monitor displays the E1 error, it indicates an air circuit abnormality. This could be due to the cuff tube not being properly connected to the monitor. Check the cuff connection and ensure it is correctly plugged in. Then, take a new measurement.
What does E3 error mean on Well Walgreens WGNBPA-950?
If your Well Blood Pressure Monitor displays the E3 error, it means there was an error determining the measurement data. Re-wrap the cuff properly so that it is positioned correctly and take a new measurement.
What to do if Well Walgreens WGNBPA-950 Blood Pressure Monitor shows EP error?
If your Well Blood Pressure Monitor displays the EP error, it indicates a system error. To resolve this, remove the batteries, wait for one minute, and then re-insert them. After doing so, take a new measurement.
What does E2 error mean on Well Walgreens WGNBPA-950 Blood Pressure Monitor?
If your Well Blood Pressure Monitor displays the E2 error, it means the inflation pressure exceeded 300 mmHg. To resolve this, switch the unit off and then turn it back on. Then, take a new measurement.
Details device emissions and compliance for electromagnetic environments.
Provides recommended distances for portable RF equipment to avoid interference.
Details device emissions and compliance for electromagnetic environments.
Provides recommended distances for portable RF equipment to avoid interference.
General| Brand | Well |
|---|---|
| Model | Walgreens WGNBPA-950 |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page