welland NetShare GX ME-752GNS User Manual

Page 1
Quick Install Guide
1. Getting Started
Kit Contents
● NAS Enclosure
● Ethernet cable
● eSATA cable
● USB cable
● Power Adapter
● Installation CD
● QIG
Minimum System Requirements
● Windows 2000/XP/VISTA/7
● Linux/UNIX
● MAC OS 9.x or above
2. Start to Assemble & Configure
① Install SATA hard disk into NAS enclosure
Pull down the “Open” switch and follow the below steps to install SATA hard disk into the enclosure.
② Cable connection and power on NAS enclosure
③ Install J2SE program for executing the NAS Tracker
Insert the CD into your PC and find “J2SE Runtime Environment.
Please double click it to setup, and setup wizard will lead you to install
this application program.
Quick
Install Guide
SATA to 10/100Mbps LAN/USB2.0 Host, NAS Disk
④ Executing the NAS Tracker to find out the NAS device
“NAS Tracker” could help you to search the NAS device over the
network directly. After install the J2SE, you can copy “NAS Tracker.jar”
from install CD to
y
our PC, double check it to execute the tracker function.
① Power Switch
② DC Connector
③ eSATA Connector
④ USB2.0 Device Connector
⑤ LAN RJ45 Connector
⑥ Printer Port
⑦ Reset Button
⑧ HDD Ejection Stick
⑨ Power LED Indicator
⑩ Access LED Indicator
⑪ Open Switch
⑫ Heat Dissipation Vents
․Please make sure your internet connection is working.
․Please connect LAN cable to the LAN port of the
ME-752GN-S and put the other end to the LAN port of
switch/hub/router which is internet connected.
․Connect the power cable, and power on the NetShare GX.
․If using LAN mode, please do not connect USB or eSATA
cable simultaneously.
Note : Above program is Windows base utility.
Note : Instead of accessing NAS by above NAS Tracker program, there is another way to access NAS by filling in default IP address of
NAS “169.254.0.1
” in your web browser. When following this way, you have to set the IP of your computer to be at the same
domain such like 169.254.0.XXX

welland NetShare GX ME-752GNS Specifications

General

Device Type	NAS server
Model	ME-752GNS
Category	Storage
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Hard Drive Capacity	0 GB
Interface	SATA 3Gb/s
Storage Type	NAS
Operating Humidity	5 - 95%
Installed Devices / Modules Qty	0
RAID Level	JBOD
Network / Transport Protocol	TCP/IP
Remote Management Protocol	HTTP
Features	DHCP support, print server
File System	FAT32, EXT3, NTFS
Power Supply	External AC adapter
Operating Temperature	0°C to 40°C
Supported Drives	3.5" SATA

Summary

Getting Started with NAS Enclosure

NAS Kit Contents

Lists the items included in the NAS enclosure package.

Minimum System Requirements

Specifies the minimum operating systems and hardware needed to use the NAS.

NAS Enclosure Components

Identifies and describes the physical components and ports on the NAS enclosure.

Assemble and Configure NAS

Install SATA Hard Disk

Guides on inserting the SATA hard disk into the NAS enclosure.

Connect Cables and Power On

Details connecting the Ethernet cable, power, and powering on the NAS.

Install J2SE Runtime Environment

Instructions for installing the J2SE Runtime Environment required for the NAS Tracker.

Execute NAS Tracker

Explains how to use the NAS Tracker application to locate the NAS device on the network.

Start Using NAS Functions

Check Hard Drive Status

Verifies the hard disk status and information after formatting.

Change Administrator Password

Guides on how to modify the administrator's password for security.

Access NetShare Manager

Instructions for accessing the NAS management interface via a web browser.

Remarks and Compliance

Full Operation Manual Reference

Informs that the complete NAS operation manual is available on the installation CD.

Product Compliance

States the product's compliance with various certifications like CE, FCC, and RoHS.