Need help?Do you have a question about the Wellav UMH160UIG and is the answer not in the manual?
Overview of the receiver/decoder's capabilities and features.
Description of the controls and indicators on the front panel.
Step-by-step guide for installing the receiver/decoder into a rack.
Prerequisites and knowledge required before installation.
Instructions for safely connecting the unit to AC power.
Instructions for connecting the unit to DC power.
List of items included in the product package.
Information regarding the maintenance requirements of the unit.
Guide to operating the unit using its front panel controls and display.
Introduction to the web-based interface for unit management.
Steps to access and log into the web interface.
How to hide inactive input ports in the web interface.
Explanation of interface buttons and status indicators.
Configuration of inputs and main operational settings.
Setting up primary and backup inputs for failover.
Configuration options for the Asynchronous Serial Interface (ASI) input.
Configuring the unit for transport stream over IP (TS/IP) inputs.
Settings for configuring Digital Video Broadcasting - Satellite (DVB-S2X) inputs.
Configuration options for Digital Video Broadcasting - Cable (DVB-C) inputs.
Setting up inputs for network protocols like HLS and SRT.
Procedure for configuring DVB Common Interface descrambling.
Settings for T2MI (Transport Stream 2MI) decapsulation.
Selecting services or PIDs for decoding.
Configuring output formats for HDMI, SDI, and Composite video.
Settings for audio output configuration.
Creating output transport streams by multiplexing programs.
Configuring the ASI output port settings.
Configuring transport stream over IP (TS/IP) outputs.
System-wide settings and configuration options.
Instructions on how to change the unit's access password.
Managing and saving unit configurations as profiles.
Generating a snapshot of unit status and logs for analysis.
Viewing installed software versions and unit serial number.
Configuring general unit settings like alias and network parameters.
Configuring preset parameters for DVB-S2X tuner signals.
Configuring network settings for management and data ports.
Displaying and managing software licenses for unit features.
Setting the unit's date, time, and time zone.
Configuring the unit to send logs to a remote syslog server.
Procedures for uploading and applying software updates to the unit.
How to restart the receiver/decoder via the web interface.
Restoring unit settings to factory default configurations.
Viewing and managing unit logs and alarms.
Viewing and managing active alarms affecting the unit.
Viewing and managing historical events and alarms.
Customizing which alarms and events are logged.
Definitions of technical terms and acronyms used in the manual.
Technical specifications for the receiver/decoder's hardware and features.
General| Model | UMH160UIG |
|---|---|
| Category | Media Converter |
| IP Output Protocol | UDP/RTP |
| Input | HDMI |
| Management | Web-based, SNMP |
| Power Supply | AC 100-240V |
To Next Page
