To Next PageTo Next Page
Need help?Do you have a question about the Wells WATER-MAX and is the answer not in the manual?
General| Brand | Wells |
|---|---|
| Model | WATER-MAX |
| Category | Water Dispenser |
| Language | English |
Lists warranty exclusions related to installation, usage, and maintenance.
Outlines steps to claim for damages incurred during shipment.
Details electrical requirements including voltage and amperage.
Details plumbing requirements like inlet size and pressure.
Provides physical dimensions of the appliance.
Identifies key components and explains their functions on the dispenser unit.
Identifies components of the 5-gallon water tank assembly.
Warns about electrical shock hazards associated with servicing.
Warns about potential damage to the appliance if instructions are not followed.
Lists agency certifications and compliance information.
Guides the user through unpacking and inspecting the appliance.
Details initial setup procedures for countertop and wall mount installations.
Alerts to personal injury risks during installation, especially from hot water.
Specifies minimum water supply line size and temperature rating.
Emphasizes compliance with codes for water connections.
States the requirement for a dedicated 50-amp circuit.
Warns of shock hazard from exposed electrical circuits during servicing.
Guides matching field wiring voltage to the unit's configuration and warns about warranty.
Warns about hot surfaces and burn hazards from hot water during operation.
Explains how to set up and use the dispenser for dispensing hot water.
Warns about burn hazards and proper tank handling.
Advises deliming if water temperature is not reaching desired levels.
Details daily cleaning procedures for the unit's exterior surfaces.
Outlines monthly cleaning tasks for the tank and unit.
Prohibits the use of specific cleaning agents to avoid damage.
Details how to remove, clean, and reinstall the tank screen.
Explains when and how to perform the deliming procedure.
Specifies the only approved deliming agent and its usage.
Details mixing the deliming agent directly into the tank.
Instructs to let the solution soak in the tank overnight and then drain.
Addresses problems with power indicator and tank indicator not lighting up.
Explains causes and solutions for a flashing status indicator.
Troubleshoots issues where no water flows from the nozzle.
Provides solutions for when the water tank fails to heat.
Addresses low water temperature issues and suggests deliming.
Lists important safety features and operational limitations of the appliance.
Explains various error codes displayed by the control board.
Warns of shock hazard from exposed electrical circuits when panels are removed.
Details the process of calibrating temperature and the deliming indicator.
Explains how altitude affects maximum safe water temperature.
Advises allowing stabilization time during calibration for accurate readings.
Lists all components and their part numbers for the dispenser.
Illustrates the electrical connections and wiring layout for the dispenser.
Lists parts and provides a wiring schematic for the 5-gallon tank.
Details procedures for servicing external cabinet components, including safety precautions.
Warns of shock hazard before removing panels for electrical servicing.
Advises caution to avoid damaging wires during wrap removal/installation.
Warns of shock hazard before servicing the inlet water valve.
Warns of shock hazard before servicing the power board.
Warns of shock hazard during calibration procedures.
Warns about burn hazards from hot water during faucet servicing.
Warns about burn hazards from hot water during tank servicing.
Warns about burn hazards from hot water during probe servicing.
Lists available accessories and optional components for the appliance.
Provides fields to record customer service and equipment information.
