EasyManua.ls Logo

Wells WB-2 - Troubleshooting

Wells WB-2
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE REMEDY
WILL NOT HEAT Power switch not
ON Turn switch to ON position
Power cord not plugged in Plug power cord into an energized
120V receptacle
Circuit breaker tripped Reset circuit breaker
Hi-Limit tripped Contact an Authorized Wells Service
Agency for repairs
Internal component damage Contact an Authorized Wells Service
Agency for repairs
DOES NOT MAINTAIN Excessive carbonization of grids Clean grids
TEMPERATURE Internal component damage Contact an Authorized Wells Service
Agency for repairs
TRIPS CIRCUIT Too many appliances on circuit Re-distribute appliances
BREAKER Have a licensed electrician
install a dedicated 20 Amp circuit
Internal component damage Contact an Authorized Wells Service
Agency for repairs
ALL OTHER Internal component damage Contact an Authorized Wells Service
PROBLEMS Agency for repairs

Other manuals for Wells WB-2

Related product manuals