Wellsys ELITE 9000 - Safety Precaution - Warning; Handling power cord with wet hands; Flammable sprays near the unit; Unit placement near heating equipment

6 WELLSYS HOT & COLD WATER PURIFIER
WELLSYS HOT & COLD WATER PURIFIER
7
Avoid pulling the power cord or
touching the plug with wet
hands.
•
•
•
•
It may cause an electronic
shock or even a fire.
Avoid spraying insecticide or
using flammable sprays near
the unit when operating.
Avoid installing the unit where it
can be exposed to flammable
gas.
Avoid excessively bending or
heavy depressing of the
power cord.
•
•
It may cause an electric shock
or a fire.
Avoid installing the unit on
unbalanced floor.
• Impedes performance of
cooler
Contact a dealer if cooler
needs to be moved
2. Safety precaution - Warning
3. Basic Operating Procedures
Avoid placing the unit near
heating equipment.
•
It may cause
product, failure,
electronic
shock or even
a fire.
Avoid contact with any metal
object while in contact with
water cooler.
It may cause
an electronic
shock.
Use the rated fuse.
Be sure to ground the unit when
installed.
Avoid grounding to
the gas pipe, the
water pipe or the
telephone line.
• It may cause an electronic shock.
: Failure to follow directions may cause severe injury
③
hot water safety
button
①
hot water spigot
Plug in the power cord to an
outlet.
2
Turn on the water
supply to the unit.
1
Check water flow of
hot & cold spigots.
3
Turn on the hot water switch
on the back of the unit.
4
To stop flow of water press either button.
Press buttons ①+③
simultaneously
Press buttons ②+③
simultaneously
Press the button② or ④
②
④
c
cold water button
old water spigot
1. cold water
2. hot water
3. cold water continuously
ELITE 9000
WELLSYS HOT & COLD WATER
•
•