www.Welltec.pro 14
Press the „POWER” button (5) on the remote control to turn the
device on or off. Attention. The unit's compressor starts up 3.5
minutes after it is turned on. This means that the air conditioner will
not start to cool or heat until this time has elapsed.
Press the „FUNC” button (3) on the remote control to change the
device's operating mode.
Press the button (4) on the panel to increase the set temperature by
1 ℃. The maximum temperature for cooling mode is 30 ℃, and for
heating mode 25 ℃.
Press the (4) button on the remote control to lower the set
temperature by 1 ℃. The minimum temperature for cooling mode is
17 ℃, and for heating mode 15 ℃.
The fan speed can be selected by the 3 buttons on the remote control
- (9, 10, 11).
To Next Page
Loading...
