Press the „TIMER” button (7) on the remote control to program the
time after which the device will turn off. Possible settings are 1 - 24h.
You can also schedule the device to turn on by pressing the „TIMER”
button when the air conditioner is turned off. When programming this
setting, you can select the desired temperature (4) and fan speed (9,
10, 11).
Press the „SLEEP” button (6) on the remote control to switch on. If the
air conditioner is in cooling mode, the unit will raise the target
temperature by 1 ℃ after one hour. After two hours, the temperature
will increase by a maximum of 2 ℃.
In heating mode, the air conditioner will lower the target temperature
by 1 ℃ after one hour of operation. After two hours, the temperature
will drop by a maximum of 2 ℃.
Press the „AUTO” button (8) on the remote control to start automatic
mode. The air conditioner will automatically adjust the fan speed to
the room temperature.
To Next Page
Loading...
