WELLTECH FXO GATEWAY H.323 3802 User Manual

F
F
X
X
O
O
G
G
A
A
T
T
E
E
W
W
A
A
Y
Y
U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
(
(
3
3
8
8
0
0
2
2
/
/
0
0
4
4
/
/
0
0
6
6
)
)

WELLTECH FXO GATEWAY H.323 3802 Specifications

General

Protocols	H.323
Ports	2 FXO
Codecs	G.711
Power Supply	12V DC, 1A
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% non-condensing

Summary

2. HOW TO SETUP AND CONNECT BASICALLY

2.2 IP Environment Setting

Guides users on preparing the IP network environment for proper gateway operation and testing.

2.2.1 For Windows 2000/NT

2.3 Network configurations in your gateway

Covers essential network configuration options, including static IP, DHCP, and PPPoE modes.

2.3.1 Static ip address

Provides detailed steps for manually configuring a static IP address for the FXO Gateway.

2.3.2 DHCP mode

Explains how to enable and utilize the DHCP mode for automatic IP address assignment.

2.3.3 PPPoE mode

Details the process of configuring the gateway to establish an internet connection using PPPoE.

2.4 Making a VoIP Call

2.4.1 Configure the gateway into the Peer-to-Peer mode

Guides users through the configuration process for establishing Peer-to-Peer VoIP calls.

2.4.2 Configure the gateway into the GK routed mode

Provides instructions for setting up the gateway to operate in Gatekeeper (GK) routed mode.

2.4.2.1 The type in GK routed mode

3. COMMAND LIST

3.1 Hyper Terminal Setting

Details setting up HyperTerminal for console access and configuration via RS-232 serial port.

[flash] command

[commit] command

[ifaddr] command

Covers configuring and displaying LAN information, IP addresses, and gateway settings.

[pbook] command

[pppoe]

[sysconf] command

Covers displaying and modifying system configuration parameters and settings.

[h323] command

Details configuring various H.323 protocol parameters for VoIP communication.

[voice] command

Guides on setting voice codecs, packet sizes, volume, and echo cancellation.

[tos] command

[prefix] command

[rom] command

[passwd] command