Need help?Do you have a question about the Welotec Arrakis Pico MK4 and is the answer not in the manual?
Device compliance with CE directives and UKCA regulations.
Compliance statement for FCC Part 15 for digital devices and transmitter modules.
Compliance statement for CAN ICES-003 Issue 7 for digital devices and transmitter modules.
Overview of the Arrakis Pico MK4 as an ultra-compact fanless embedded system for industrial use.
Detailed technical specifications of the Arrakis Pico MK4, including processor, memory, and I/O.
Diagram illustrating the physical layout and dimensions of the Arrakis Pico MK4 system.
Block diagram detailing the relationship between interfaces and modules on the Arrakis Pico MK4 mainboard.
Visual representation of the Arrakis Pico MK4 system's ports and connections.
Pin-out diagram and description for the power connector of the Arrakis Pico MK4.
Wiring schematic illustrating the connection of the power connector and reset button.
Details for COM and Digital Input/Output connectors, including RS232/RS485 modes.
Functionality and parameters for Digital Input/Output and Watch Dog Timer.
Introduction to the BIOS, its role as a bridge between hardware and OS, and POST process.
Instructions on how to enter the BIOS setup utility on the Arrakis Pico MK4.
Overview of the BIOS setup main menu and the function keys for navigation and operation.
Explanation of the BIOS help window and how to use it for assistance with setup options.
Description of the BIOS main menu, displaying basic system information and navigation.
Introduction to Advanced BIOS settings, covering ACPI and CPU power management.
Details on enabling/disabling ACPI S3 support for power management.
Configuration options for CPU power limits and their impact on performance and temperature.
Configuration settings for PCH-IO, including PCI Express and SATA interfaces.
Settings for PCI Express configuration, including NGFF1 M.2 B-Key and PCIe speed.
SATA configuration options, including controller status and serial ATA port settings.
Settings for console redirection, enabling remote access and terminal configuration.
Configuration details for UART Port 1, including terminal type and baud rate settings.
Configuration for system behavior after a power loss event, including default options.
Security settings for the device, including TPM configuration and supervisor password.
Instructions on how to set up a supervisor password for enhanced system security.
Recommendations for increasing device security through BIOS settings like admin password and boot media.
BIOS settings related to power management, such as Wake-On-LAN, USB, and RTC.
BIOS settings for boot type, quiet boot, network stack, and boot device priority.
Options for exiting the BIOS setup, including saving changes, discarding changes, and loading defaults.
Instructions for using the watchdog timer demo application under DOS, including source files.
Instructions for using the watchdog timer and DIO demo application under Windows, including source files.
General| RAM | 4 GB DDR3L |
|---|---|
| Power Supply | 12-24 VDC |
| Ethernet | 2x Gigabit Ethernet |
| Serial Ports | 2x RS232/422/485 |
| Operating System | Windows 10 IoT Enterprise, Linux |
| Display Outputs | 1x HDMI |
| Weight | 0.5 kg |
To Next Page