Need help?Do you have a question about the Wemars WS-ST25G and is the answer not in the manual?
Details about the grass trimmer with a combustion engine and its ongoing development for safety and efficiency.
Specifies the product's use for grass trimming and clearing, advising compliance with local regulations.
Lists essential tools and parts included with the product for assembly and maintenance.
Explains warning symbols, PPE requirements, operational indicators like choke and fuel, and safety distances.
Outlines conditions under which the manufacturer is not liable for product damages or injuries.
Defines warning terms (WARNING, CAUTION, Note) and provides crucial safety instructions for product operation.
Details safe operating practices, including avoiding fatigue, bad weather, and maintaining a safe distance from others.
Recommends helmets, hearing protection, and approved eye protection (goggles/visor) for safety.
Advises on wearing protective gloves and durable clothing to prevent injuries and entanglement.
Emphasizes protective boots, securing hair, and keeping first aid readily available.
Guides checking the throttle trigger lockout, stop switch, and cutting attachment guard for safety.
Covers muffler checks and general safety instructions before performing maintenance tasks.
Step-by-step instructions for attaching the front handle to the main shaft using provided hardware.
Guides the installation of the cutting attachment guard and the trimmer head onto the shaft.
Instructions for attaching the 3-tooth blade head and the trimmer head to the drive shaft.
Explains connecting the shaft and wearing the shoulder harness correctly.
Details how to connect the harness buckle to the trimmer's hook for secure attachment.
Explains the emergency release mechanism of the harness via a red tag.
Covers fuel type, octane rating, and the correct procedure for mixing gasoline and two-stroke oil.
Warns against using four-stroke engine oil and emphasizes oil quality for product longevity.
Instructions for safely filling the fuel tank, including cleaning the area and moving away before starting.
Step-by-step guide for starting a cold engine, including switch, primer, choke, and starter rope usage.
Covers the final starter rope pulls, throttle operation, and ensuring smooth engine running.
Details the simplified steps for starting an engine that is already warm.
Simple instruction to stop the engine by moving the switch to the stop position.
Covers surface warnings, trimming grass, and sweeping cut grass using proper techniques.
Details how to cut grass effectively by keeping the line parallel to the ground and using a side-to-side motion.
Covers cleaning external surfaces, checking safety features, filters, guards, starter, and cables.
Details checks for spark plug, bevel gear greasing, and fuel system components.
Covers replacement of spark plugs, clutch parts, and clutch drums, advising professional service.
Instructions on adjusting the idle speed screw and ensuring the cutting attachment stops at idle.
Guidance on checking and adjusting the spark plug electrode gap for optimal engine performance.
Details on cleaning/replacing air filter and maintaining the trimmer head.
Diagnoses common causes and solutions for when the engine fails to start, including fuel and spark plug checks.
Addresses problems where the engine starts but then stops, focusing on fuel and air filter checks.
Details steps for disassembling the head, preparing the line, and loading it into the spool.
Covers trimming the loaded line to the correct length and reassembling the trimmer head.
Ensures the user understands how to use the trimmer head after loading new line.
General| Displacement | 25.4 cc |
|---|---|
| Power | 0.75 kW |
| Power Output | 1.0 HP |
| Fuel Tank Capacity | 0.6 L |
| Cutting Width | 255 mm |
| Weight | 5.5 kg |
| Starter System | Recoil |
| Handle Type | Loop Handle |
| Engine Type | 2-Stroke |
To Next Page