Wemo F7C063 User Manual

Setting up the Wemo® Mini Smart
Plug, F7C063
Body
The Wemo® Mini Smart Plug, F7C063, lets you turn electronic devices ON or OFF
from anywhere using your smartphone or tablet. This home automation device uses
your existing home Wi-Fi to provide wireless control of lamps, heaters, fans and more.
You can even set schedules for your devices and control them remotely using a mobile
internet connection.
Follow the instructions below to learn how to set up your Wemo Mini.
Step 1: Plug your Wemo Mini into a three-pronged grounded outlet.
NOTE: Wait for the Status light to blink orange and white. This
signifies that the Wemo Mini is now ready to be set up. To know more
about the Status light behaviors of your Wemo Mini, click here.
Step 2: Tap the Settings icon on your Android™ or iOS device.
Enable Wi-Fi and connect to your Wemo network. Each Wemo device
has a unique Wemo ID printed at the back of the unit.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the...
1 of 7 10/30/2017 10:50 PM

Wemo F7C063 Specifications

General

Brand	Wemo
Model	F7C063
Category	Home Automation
Language	English

Summary

Setting Up the Wemo® Mini Smart Plug

Initial Plug-in and Wi-Fi Connection

Plug the Wemo Mini into an outlet and connect to its Wi-Fi network.

App-Based Configuration

Launch the Wemo app, personalize the device, and enter your email address.

Home Network Integration

Select your home Wi-Fi, enter the password, and enable remote access.

Setup Completion

The Wemo Mini is now successfully set up and visible in the Wemo App.

Wemo Mini Factory Reset Procedures

Resetting via Power Button (Scenario 1)

Steps to reset when the Wemo Mini has a blinking orange light.

Resetting for Device Discovery (Scenario 2)

Steps to reset if the Wemo Mini is not found on the Wi-Fi list or app.

Wemo Mini Status Light Guide

Understanding the Status LED

Explanation of the Wemo Mini's single power and status light.

Decoding Status Light Indicators

Meanings of different light states like blinking white, solid white, blinking orange, solid orange.

Troubleshooting Wireless Connection Issues

Factors Affecting Signal Strength

Overview of distance, physical obstructions, and interference as signal issues.

Router and Power-Related Problems

Addresses outdated firmware, power outages, and channel settings.