Seat Assembly
Lifting Pole
Base Assembly
ASSEMBLING THE ROLLER SEAT (FIG. 1 & 2)
1. Place the base assembly (Fig. 1 - 1) on a flat surface.
2. Insert the large end of the lifting pole (Fig. 1 - 2) into the round opening in the center of the base
assembly.
3. Place the seat assembly (Fig. 2 - 1) over the top end of the lifting pole (Fig. 2 - 2).
4. Once the seat is assembled, press down in a controlled firm manner on the cushion to press the
parts together. Make sure seat is properly and firmly assembled before use.
6
Fig. 1
1
2
Fig. 2
1
2
UNPACKING & PACKING LIST
UNPACKING
Carefully remove the roller seat from the packaging. Make sure to take out all contents and accessories. Do not dis-
card the packaging until everything is removed. Check the packing list below to make sure you have all of the parts
and accessories. If any part is missing or broken, please contact our customer service at
1-800-232-1195
(M-F
8-5 CST), or email
techsupport@wenproducts.com
.
PACKING LIST
ASSEMBLY & ADJUSTMENTS
To Next Page
Loading...
